Original attic stairs is made easier by installing a set of attic pull down stairs. Stairs are usually made of wood and folded so it can be kept in the attic entrance. Stairs are often installed by non-professionals and have security issues. It is essential that the attic down the ladder is installed properly to avoid injury. Defects and problems are often observed in attic pull down stairs of installation. One common installation defect is that members of structures such as rolls or floor beams are cut to accommodate the stairs.
Members of the attic floor structure should not be removed, coated or cut without proper reinforcements installed. Most of the attic stairs are designed to fit between the floor blocks but when the floor beams need to be cut, professional evaluations should be made to strengthen the floor structure. Often hardware, screws and nuts that hold the ladder hinge are lost or loose. All fasteners should be installed and everything should be tight so as to avoid danger. Missing bolts or nuts should be replaced to avoid serious injury.
The attic ladder is often cut too short so that the bottom of the stairs depends not to touch the floor. This condition is unsafe and can cause serious injury. The bottom of the stairs should be placed firmly on the floor so as not to cause excess pressure on the attachment at the top of the stairs. If the ladder is too long the hinge will bend down and put too much pressure on the ladder hinge.
More reader came from this term: original attic stairs